Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cranksets

Campagnolo Chorus 12-Speed Crankset
$408.00
The Campagnolo Chorus 12-Speed Crankset features lightweight carbon crank arms, and is optimized for Campagnolo's Ultra-Torque crank system. - Utilizes Campagnolo's Ultra-Torque crank system to provide a very lightweight and stiff system that transfers power to the pedals without power loss - Directly molded unidirectional carbon fiber cranks, steel axle, and aluminum chainrings provide exceptional stiffness and optimum power transmission - Symmetrical teeth on the internal chainring allow for fluid and precise transmission, even with extreme cross-chaining - Chainrings are surface-treated for longer life - Q-Factor: 145.5mm - Design is optimized to run multiple chainring combinations - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 96 - Pedal Spindle: 9/16" - Crank Intended Use: Road - Drivetrain Speeds: 12 - BB Included: No - Weight: 686
Campagnolo Super Record 12x2 Speed Crankset
$995.00
The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design." The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design. The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
Cane Creek eeWings All-Road Crankset
$999.00 - $1,100.00
The Cane Creek eeWings All-Road titanium crankset offers superior stiffness, durability, and weight savings. This slimmer crank is specifically designed to take on road, gravel, and cyclocross configurations. - 20%-30% more stiff than premium carbon cranks, while remaining in the same weight range - Includes CNC machined aluminum bottom bracket preload adjustment ring - 30mm spindle is compatible with the following bottom brackets: BSA68mm, PF86, BB30 (External Bearing Only), PF30 (External Bearing Only), and 386EVO - 160mm Q-Factor - Backed with a 10-year limited warranty - eeWings Tie-Dye cranks are made from the same high-grade titanium as the standard eeWings cranks and are hand-finished in a blue to purple tie-dye color giving each crank a unique character - Changes and wear to the color are expected as the cranks are ridden and will not be covered by the warranty - An optional clear adhesive surface protector will be included in the box to help ensure that the finish lasts over the course of regular use Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 135/142 Road Disc Hubs > 415mm Chainstay, 135/142 Road Disc Hubs < 415mm Chainstay - Crank Intended Use: Road, Gravel, Cyclocross - Pedal Spindle: 9/16" - Spindle Interface Type: BB30/PF30 , 386 EVO , RaceFace/Easton CINCH - Chainring BCD: Direct Mount SRAM - Weight: 395 - BB Included: No
Dimension Cruiser One-Piece Crankset
$27.99
Dimension Cruiser one-piece hot-forged chromoly steel cranks. - One-piece, hot-forged chromoly steel crank - Cruiser chainwheels sold separately - Requires 24 tpi American bottom bracket - Crankset has 1/2-inch pedal threading
Dimension Bash Guard
$39.99 - $44.99
Aluminum bash guard.
Dimension Cross Crank Arm Set
$59.99
Dimension Cyclocross Arm Sets made of 6061-T6 aluminum. - Forged AL-6061-T6 - BB Not Included - Chainrings Not Included - 110/74 BCD - Drivetrain Speeds: 10, 9, 8 - Number of Chainrings: Double - Pedal Spindle: 9/16-inch - Spindle interface Type: Square Taper JIS - Weight: 590g
Easton EC90 SL Crank Spindle
$89.99
Replacement crank spindle for Easton EC90 SL cranks
Easton EA90 Crankset
$119.99
The Easton EA90 aluminum crankset is optimized for gravel, cyclocross, and road riding styles. It offers the versatility of the CINCH system for a variety of gearing combinations. - EA90 alloy crank arms are lightweight and feature a matte black anodized finish - CINCH direct mount technology is compatible with both 1x and 2x setups - CINCH power meter compatible - Bottom bracket and chainrings sold separately - Number of Chainrings: No Rings, No Spider Included - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay, 135/142 Road Disc Hubs < 415 mm Chainstay - Crank Intended Use: Cyclocross, Gravel, Road - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace/Easton CINCH - Drivetrain Speeds: 10, 11 - BB Included: No
Easton EC90 SL Spider and Ring Assembly
$149.99
The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum
Easton EC90 SL Crankset
$349.99
The Easton EC90 SL crank utilizes CINCH technology which allows for direct mount 1x rings as well as direct mount 2x spiders, and industry-leading versatility. Easton refines the design for larger ring applications with improved chain retention while reducing running noise and friction. - EC90 SL carbon arms feature hollow carbon construction, while the 30mm spindle and pedal inserts features high-grade aluminum - CINCH direct mount technology is compatible with both 1x and 2x setups - Bottom bracket and chainrings sold separately - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS BB tool for removal and installation - Number of Chainrings: No Rings, No Spider Included - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay, 135/142 Road Disc Hubs < 415 mm Chainstay - Crank Intended Use: Road, Cyclocross - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace/Easton CINCH - Drivetrain Speeds: 10, 11 - BB Included: No
FSA BB30 Crank Bolts
$13.99
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
FSA ISIS Crankarms
$28.99
FSA ISIS eBike replacement crankarms.
FSA BB-386EVO/Press-Fit BB30 Bearing Assembly
$49.99
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or stainless steel options
FSA Vero Compact Crankset
$84.99
FSA's Vero Compact Crankset features a ramped and pinned alloy outer chainring with a tough chromoly inner chainring. And, its cold-forged aluminum crankarms are stiff and lightweight with ankle-friendly countours. - Shimano/SRAM 9-speed compatible - Spindle interface: Square Taper JIS - Weight: 688g
FSA Comet HD Modular Crankset
$104.99
The FSA Comet crank is a stiff, modular 1x crankset with a 24mm alloy spindle, offering high-value for the price. Solid forged 6061 aluminum arms put power and durability at the forefront, with channeling at the back to trim weight. A no-pinch bolt design on the left-hand crankarm makes fitting easier and looks cleaner. The modular configuration allows for compatibility with boost 148 frames. - Convertible spider design for different chainring and chainline configurations - Thick-thin tooth design for maximum chain engagement - Solid forged AL6061 crank arms - 24mm chromoly spindle - Direct mount steel chainring - Number of Chainrings: Single - Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Rings: 32 - Spindle Interface Type: FSA MegaExo - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount FSA - BB Included: No
FSA Gossamer Tandem Front Crankset
$152.99
To be in sync on a tandem is the essence of the experience. FSA's Gossamer tandem cranksets keep your timing perfect, and keeps the power going to the rear wheel where it belongs. The communication and balance? That's up to you and your partner. - Shimano and SRAM 10-Speed compatible
FSA Gradient Modular EVO Super Boost+ Crankset
$219.99
The FSA Gradient crankset is designed for enduro riding, for riders that like to crank up the trail and tear it apart on the way back down. Gradient raises the standard on strength, while keeping components lightweight. - The convertible spider design allows for different chainring and chainline configurations - Direct mount steel chainring features a thick-thin tooth design for maximum chain engagement - Crank arms are solid forged from AL7050 aluminum - Optimized for 11-speed systems - For Boost spacing - Number of Chainrings: Single - Chainline/Hub Compatibility: 150/157 Hubs, 157 Super Boost Hubs - Crank Length: 170mm - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Rings: 32 - Spindle Interface Type: 392 EVO - Drivetrain Speeds: 11 - Chainring BCD: Direct Mount FSA - BB Included: No
FSA Gossamer Tandem Crankset (Rear)
$229.99
Harness the power of your tandem team with FSA's Gossamer MegaExo Tandem Crankset. The rear crankset features cold-forged aluminum crankarms, hill-topping 52/39/30 chainrings, a 42-tooth idle chainring, and a proprietary spacer system to fine-tune your chainline.
FSA Energy Modular BB386EVO Crankset
$269.99
The latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Hollow forged arms - Forged AL7050 BB386EVO spindle - Direct mount outer chainring and 90 BCD inner chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs - Spindle Interface Type: 386 EVO - Chainring BCD: 90, Direct Mount FSA - Pedal Spindle: 9/16" - Crank Intended Use: Road, Gravel - Crank Length: 170mm - Rings: 46/30 - Drivetrain Speeds: 11 - BB Included: No - Weight: 755
MRP 1x V3
$74.95
The 1x guide is the definitive cross-country chainguide. Used on the World Cup circuit and even in the 2012 London Olympics, the 1x has a proven track record of dependability and performance. The 1x is the perfect guide for riders and racers wanting a lightweight single-ring front drivetrain for cross-country use or riders wishing for more security out of their "narrow/wide" or XX1/X01 setups. Freshly updated for 2015 with the new co-molded "TR" upper guide - lighter and quieter, what's not to love? - Adds security to "narrow/wide" 1x10/11 and XX1/X01 drivetrains - Most models accommodate 26-38t chainrings - Tracked and grooved upper guide / backplate interface increases stiffness and eases installation - New co-molded "TR" upper guide with softer durometer interior for silent guidance - All install and adjustment operations possible with just a single 4mm HEX wrench. - BB mounted guides are only compatible with traditional, threaded BB systems
North Shore Billet 2x10 Spider for SRAM GXP Cranks
$70.00
The North Shore Billet 2×10 Spider replaces the stock chainring spider so that you can run smaller chainrings on SRAM XX1, X01, X1, X0, X9, X7, and GX cranks using GXP bottom brackets. With the NSB 2×10 Spider you can run a more traditional 22/32T or 24/34T combination. The NSB 2×10 Spider is designed to use any standard 64 / 104 BCD 9 speed chainring. The distance between the rings and the distance from the centre of the bottom bracket is the same as the 120 BCD spider so the set up is simple and the shifting is quick!
Origin8 Single Chainring Bolts
$7.99 - $22.99
Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height
Origin8 Double/Triple Chainring Bolts
$9.99 - $17.99
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.
Origin8 Track/SS Crankset
$79.99
Origin-8's Track/SS Crankset is made of light and durable forged aluminum. It has a fine machined-aluminum 46-tooth chainring for super-smooth pedaling and comes in a variety of colors to make your bike the coolest ride on the block.
Promax SQ-1 Crank Arms
$79.99
Promax SQ-1 Crank Arm sets more than cover your need for hard-to-find lengths and hard-to-miss colors. - BCD: 110mm - Weight: 25.2 oz.
Promax CF-2 Crank
$149.99
Promax's CF-2 BMX Crankset features cold-forged 6061-T6 aluminum arms, a 2-piece design, and included external bottom bracket. - BCD: 104mm - Spindle diameter: 24mm
Promax HF-2 Crank Set
$299.99
Promax HF-2 BMX Cranksets are Promax’s top-of-the-line crank offering. Hollow-forged from 6061-T6 aluminum, both crank arms are hollow so they are super-stiff, yet lightweight. The crank arms spin on a beefy 24-millimeter spindle permanently fitted into the drive-side arm. - Bottom bracket sold separately - Pedal washers included - Meets or exceeds ENBMX standards - Chainline: 43mm - Q-Factor: 167mm - BCD: 104mm - Weight: 29.5 oz.
Quarq Quarq DUB Crankarm Assembly
$196.00
Stronger, stiffer, and lighter than ever; that is exactly what you can expect with the Quarq DUB crank arm assembly. Paired with the DZero or DFour DUB power meter spider and the DUB bottom bracket, the Quarq DUB crank arms assembly builds a power meter that can handle the toughest of conditions. - Only compatible with Quarq DZero DUB and DFour DUB power meter spiders - Does require a SRAM DUB bottom bracket
Race Face CINCH Puller Cap with Washer 18mm XC/AM
$6.99
Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread
Race Face 2008+ Next SL and 2012+ Atlas Crank Bolt/Puller
$8.99
Race Face crank bolt/puller for 2008 and newer Next SL cranks and 2012 and newer Atlas cranks.
Page 1 of 5 Next page