- Rigid steel stays with 9mm dropouts - Mounts to any flat surface (also fits stableloader)
- Rigid 6061-aluminum body with 9mm skewer
- Powdercoated steel body with 9mm skewer & hole in handle for padlock
Delta's pre-aligned positioning bike hitch allows for easy fork installation. It features special anti-rust treatment with a tough powder-coat finish. This ultra-rigid 9mm skewer allows you to easily carry your front wheel with a Delta Wheel Hitch or Wheel Holder (each sold separately). - Pre-aligned positioning for easier fork installation - Special anti-rust treatment with tough powder-coat finish - Features patented Delta locking lever - Base Dimensions 4" x 1.5" x 1.75" - Mounting Holes 3" center to center - Ultra-rigid 9mm skewer - Carry your front wheel with a Delta Wheel Hitch (sold separately)
- For carrying unique frames on hang-on type car racks - Quick release clamp adjusts to fit between stem and seatpost - Rubberized hooks protect bikes finish
Delta's Wheel Holder mounts to any flat surface to keep bikes stabilized. - Holds front wheel in place - Rigid steel stays with 9mm dropouts - Mounts to any flat surface
Not a fair weather rider? Neither are we. Protect your ride from mud with the new Race Face team seat covers. Built as a quick fix barrier between rider and seat, the 96% nylon, 4% spandex fiber content means this cover is built for abuse. A waterproof membrane and DWR finish ensure your seat stays dry.
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
Saris' Bike Beam connects to your bike's seatpost and stem to simulate a standard top tube. It allows you to carry bicycles including full-suspension, women's, and children's bikes, and those with oversize tubing on your trunk or hitch-mounted carrier.
Saris' Traps Wheel Holder mounts easily to your Saris Single or Triple Track (each sold separately) to keep your front wheel secured. It accepts the wheel with little or no quick-release adjustment. Mounting hardware is included.
Give your bike first-class treatment on the way to the ride. Saris' Traps Single Track mounts easily on the floor of your cargo area or truck bed and holds 2 bikes. Included is mounting hardware for three Traps fork mounts (sold separately).
Having enough room for another bike is rarely an issue with Saris' Traps Triple Track. Simply lay it on the floor of your SUV or place it in your truck bed and add your choice of attachments. Your bikes are guaranteed a stable ride. The unique design allows bikes to be staggered or angled for hauling more bikes in a compact space. Fork mounts and wheel holders are sold individually to let you customize your Triple Track.
Saris’ Bones 3-Bike rack unites utilitarian strength and modern style. Crafted of incredibly strong, injection-molded plastic, the four arched leg mounts and two arched arms cradle your bikes on different levels to minimize unwanted handlebar and seat contact. Six highly adjustable straps, each equipped with soft, vinyl-coated hooks, hold the rack down, while the four legs have grippy rubber feet to provide a sturdy base that won't harm your vehicle's finish. Ratcheting, soft-touch, anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers. Plus, it folds fast for easy portability and storage.
- Carries 2 bikes (35 pounds/bike). - Preassembled. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-ubcg hitches out of the box. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 15 pounds. - Made in Madison, WI.
Secure your bikes with Saris' Kool Rack 2-Bike. Hydraulic pressure holds the rack in place while valve limits protect your truck bed walls. Its pivoting rubber pads grip most surfaces, including bedliners. No drilling is required. The Kool Rack comes with two fork mounts—additional mounts can be added (sold separately). Besides holding bikes, the Kool Rack can be used to secure cargo from sliding around the pick-up bed.
Transport all types of bikes with Saris' Freedom Spare Tire 2-bike rack. Designed to fit all spare tires (left-, right-, or center-positioned), this innovative rack adjusts to fit most bikes and sizes, including kids’ and even some recumbents, thanks to the adjustability of its center upright support. It uses quick-adjust trays and ratcheting straps to secure two bikes of up to 35 pounds each. Loading is made easy by the low tray height. The center upright support even tilts down to stay out of the way when not in use.
Meet the SUPERBones. It is the classic Bones 3-bike trunk rack, reimagined. Saris took everything they've experienced, observed and learned from their Bones customers and used it to guide their design process. Out of that work was born a trunk rack more secure, more beautiful and more intuitive. With interwoven steel straps that store neatly within the rack to the floating foot that pivots to conform to a wide variety of trunk shapes, the SUPERBones is truly a functional piece of art with all the features of a forward-thinking bike rack. - Carries 3 bikes (35 lbs/bike) - Anti-sway adjusts in and out to maximize bike protection - Bikes are easy to load thanks to pivoting anti-sway straps. - Integrated locking to secure bike to rack and rack to car - Heavy duty straps reinforced with internal steel strands - Strap adjustment lever quickly tightens rack to car - Internal ratcheting mechanism creates the best-in-class strap management - Adjustable foot for maximum protection of car by intuitively adjusting to vehicle’s trunk, bumper shape and design - Stationary outer leg creates an easy install on vehicle - Frame fits over most spoilers - Rust-free, injection molded plastic - Compatible with most vehicles (consult the Saris Fit Guide for approved fits) - Lightweight at 18.5 lbs
Want all the innovations of our revolutionary Glide rack, but only need to transport a couple of rides? This 2-bike hanging hitch rack has you covered. The Glide EX 2-bike features the same noteworthy and one-handed glide action of its Glide brethren, plus a beefed-up bike spec: the ability to carry 50 lb per bike. Yep, that's right - this hanging hitch bike rack is eBike compatible. Simply push the trigger to release the rack, glide away and boom – hatch access. When you’re done, the same amount of (non) effort glides the rack upright and you’re good to go. It’s the same one-button, one-step, one-motion movement for when the hitch rack is fully loaded and when it’s not. Product Features - eBike Friendly: this hanging hitch bike rack transports 2-bikes, up to 50 lb each. - Convenient, one-step access to the back of the car - fully loaded with bikes or not. - Innovative four-bar linkage system controls the center of mass, creating a smooth, glide-action away from the vehicle. - Complete integrated security: locks the rack to the car and the bikes to the rack. - Hanging hitch style bike rack. - Carries 2 bikes, up to 50 lb. each. - One-button glide action provides instant access to rear of vehicle, both with bikes loaded and without. - No assembly needed. - Rack weight: 37 lb. - Bike hold downs are easy to use and quick to load. - Best-in-class ratchet straps speedily fasten bike to the rack. - Integrated locking cable secures bikes to the rack. - Locking hitch pin secures rack to the car. - Universal hitch: fits 1 ¼” and 2” hitches out of the box. For use with receiver hitches Class II or higher. - Built and tested to outlive the elements.
The only thing left to do is answer. No matter where the call beckons, the MTR can get you and your ride there. Designed with versatility at its core, the MTR (aka: modular tray rack) can transport a variety of bikes and can be easily customizable with add-on trays to bring your whole collection of shredders or ride-share with friends. Each MTR rack is built from American-made steel and aluminum for maximum durability. Roomy wheel trays swallow bike tires up to 5 inches wide for a stable hold, while dual-arm wheel holders keep bikes locked in position – and keep the paint chip-free. It’s all built on a rugged hitch-based foundation that can be tilted away, when fully loaded with bikes and without, for fast and easy vehicle access – because after all, those snacks aren’t going to pass themselves. Plus, the MTR’s nesting bike trays make for easy-on, easy-off loading. No more lifting bikes over the rack – simply flip the trays out of the way as needed to get you from parking lot to trailhead in record time. The Saris MTR also available in a 1-Bike version. Product Features - Modular: carries 2 bikes, up to 60 lbs, and can be customized with Add-On to transport up to four bikes. - Pivot away: unique wheel trays pivot and nest for easy loading and compact storage. - Dual-arm holders are compatible with a wide range of tire sizes, and never touch the bike's frame. - Full Tilt: tilting mechanism for easy hatch access. - Complete Integrated Security: locks the rack to the car and the bikes to the rack. - Designed to be used with 2" hitch receivers only. - Tray-style hitch bike rack - Carries 2 bikes, up to 60 lb. each - Customizable to carry more bikes with 1-Bike Add-On and 2-Bike Add-On - No assembly needed - Rack folds up for compact storage when not in use. - Tool-free installation - Rack weight: 55 lb - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches - Integrated locking cable secures bikes to the rack - Locking hitch pin secures rack to the car - Accommodates wheel bases up to 53 inches - 2" hitch compatible - Constructed from American-made aluminum and steel, and tested to outlive the elements
Thule's Load Bar End Caps are replacement end caps for rectangular load bars.
Thule's Accessory Strap Kit is a set of four rubberized, replaceable, ladder-style straps for use with many of Thule's bike racks and anti-sway cradles.
The Thule Xadapt 1 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid or Xsporter load bars. Please contact us with any questions regarding compatibility.
The Thule Xadapt 3 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.
The Thule Xadapt 7 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.
T-track adapter for all Thule aluminium bars.
An adapter to enable safe transport of bikes with carbon frames. Features - The fixation pressure is distributed over a large surface area to minimize risk of frame damages - It fits all types of frame geometries and is easily adjustable with no loose parts - The adapter has a soft TPE rubber liner to avoid scratching the bike frame - Only to be used with Thule bike racks with a torque limiter knob (e.g. Thule ProRide 598003, Thule EasyFold, Thule DoubleTrack 9054, Thule Raceway 9003PRO)
Long loop strap provides anchor point for boat and load straps on vehicles without undercarriage attachment points. - Installs easily to available bolt heads under the hood - Boat bow & stern tie-down loops that are fastened inside the vehicle hood and protrude out through the edge to provide a secure loop to attach tie-downs
Page 1 of 5 Next page