Filter By:
- Parts & Accessories (72)
- Pedals (135)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Pedals
$7.99
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.

$8.99
Shorter 7mm rear load pins for the outer extremities of SPOON, SPIKE, and OOZY pedals.
- Provide durability and improved safety
- Mix and match with the longer stock pins to customize your ideal amount of grip

$9.00
Dimension Nylon Basic Toe Straps
-Durable metal buckle
-Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel)
- 450mm

$9.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
- Sold in pairs

$9.99
Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.

$9.99
Dimension Junior Pedals.
- Molded nylon, 1-piece, caged-type pedals
- Built-in reflectors, will not accept toe clips
- Overall pedal size is 80 x 60mm
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch or 1/2-inch
- Pedal Type: Platform
- Spindle Material: Chromoly Steel
- Weight: 230g (9/16-inch); 304g (1/2-inch)

$9.99
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- 440mm length

$9.99
If your favorite ride leads to the beach or perhaps the grass at the local park, Electra's Barefoot Pedals are here. They feel the same way with their foot-friendly platforms and comfy plastic bodies. Treat your feet to smooth comfort with these durable platforms.

$9.99
Simple functionality: that's what Electra's Deluxe Block Pedals offer your favorite cruiser. With plenty of platform for your sneakers, the Deluxe Block Pedals are as comfortable as can be for your entire ride.

$9.99
IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action.
- 2pcs IGUS self lubricating bushing
- 2pcs O-ring
- 2pcs stainless shim washer

$9.99
Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness.
- 28pcs rear load pins
- 16pcs front load pins
- Tool included

$11.00
Dimension Mini Toe Clips
- Toe clips do not accept toe straps
- Sold as a pair
- Mounting hardware for the toe-clip is included

$11.00
Dimension Toe Clips and Straps Set.
Includes:
- 4 bolts
- 4 nuts (washers included)
- 2 nylon toe straps
- 2 toe clips

$11.99 - $13.99
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- 430mm length

$11.99
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for -bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- Poly leather (vegan) toe strap
- Velvet finish
- 450mm length

$12.99
Replacement bearings and bushings specific to Spoon 90 (Small) and 100/110 (Medium and Large) pedals. Eliminates play that can develop over time, and revives performance.
Includes:
- Sealed Bearing x2pcs
- 10mm IGUS Bushing x2pcs
- Green Friction Seal x2pcs
- Locknut
- O-ring x 2pcs

$13.99 - $29.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated.
- High-strength plastic composite

$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer.
The kit includes:
- 8 × 1mm traction pads
- 8 × 2mm traction pads
Compatible with:
- Mallet E
- Model years 2016 – present

$14.99
- Fits most platform pedals
- Two wooden riser blocks w/durable rubber band
- Adds 3/4" to each side (1-1/2" total)

$14.99
- 1-Piece, molded, cage-style body
- Loose ball bearings
- Accepts toe clips/straps
- Spindle Material: Chromoly
- 305g

$16.50
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
- 4 degrees of float both inward and outward

$16.99
While staying true to the original Twisted PC’s style, the Twisted PRO offers a significantly larger body shape, slimmer height, and more concave while still being built around a traditional loose-ball bearing configuration.
Features:
- High-strength Nylon composite
- 12 oversize pins per side
- Traditional loose ball bearings
- Chromoly spindle
- High-strength plastic composite
- Wider & longer pedal body
- Larger concave area
- Slimmer profile
Specs:
- 9/16-inch spindle
- 104mm Width
- 98mm Length
- 14.6 oz (pair)

$17.00
X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK cleats provide a 13° angle of disengagement and allow for unidirectional release only.
- Compatibility: X-Track and Geo Trekking Collection, SPD compatible
- Material: Premium Steel
- Clip out direction: Lateral
- Angle of Disengagement: 13°
- Lateral Adjustment: 2mm
- Angular Adjustment: 1°
- Weight (pair): 45g
Page 1 of 7
Next page